Hydrotech Drumfilter

The Hydrotech Drumfilter is the right choice for applications with lower flow rates or with higher inlet solids concentrations.The drumfilter employs woven cloth filter elements installed on the periphery of the drum, and utilizes an inside-out flow pattern. As with the Hydrotech Discfilter, the drumfilter technology is appropriate for a variety of applications including tertiary wastewater filtration, water reuse, Phosphorus removal, membrane pre-treatment, stormwater treatment, and primary influent treatment

Water to be treated flows by gravity into the filter via the center drum. The media mounted on the partially-submerged drum separates solids from the water.The filtered water flows through the media into the collection tank. Once solids have accumulated, the media is cleaned by the counter-current backwash system.The filters are in continuous operation even during backwash and high solids events.

Drumfilters are available for placement into concrete basins or as stand-alone units with stainless steel or fiberglass tanks included.More than 3500 units are installed worldwide, making the Kruger Hydrotech Drumfilter a proven solution for low flow tertiary treatment and process water filtration.

BENEFITS

• Stainless Steel Construction
• Straightforward Controls
• Simple Operation and Maintenance
• Ease of Installation (Package Design)
• Low Backwash Water and Power Usage
• Continuous Operation

For additional information on the Hydrotech Drumfilter, please contact Mark Stewart at (919) 677-8310.